BALLISTICS DRIVE REMOVAL (CONT) - TM-9-1220-220-340060

TM 9-1220-220-34

4-4.

BALLISTICS DRIVE REMOVAL (CONT)

FRAME 2

Step

Procedure

CAUTION

Before removing rear connector assembly (1), place a

wooden block (2" x 4" x 4") between range finder (2)

and turret top so range finder is not damaged.

Using 1/2" box end wrench, remove four screws (3) and four lockwashers (4) holding

cap (5) to range finder (2).

Remove rear connector assembly (1) from range finder (2).

Replace cap (5), four lockwashers (4) and four screws (3) on range finder (2) and hand

tighten to prevent loss.

GO TO FRAME 3

Para 4-4 Cont Vol II

4-6