Item and Procedure
Item and Procedur e
ILCA for leaks, cracks, and security of components. Linkage for
Copilot seat and seat belt for ser viceability.
security ILCA area for evidence of interference and for foreign
Left jettisonable door latches for engagement (top and bottom),
objects. Jam sensors for extended war ning indicators. Lower
for RELEASE handle in closed position. Sliding window
pressure control modules for condition and security.
mechanism and latch for security, proper operation, and
Structural shelf (drip pan removed) beneath first stage mixing
unit for foreign objects.
Number one PDP circuit breakers as required. Spare lamp box
Forward transmission lower area (drip pan removed) for evidence
of leaks and security of components and hardware.
Copilot instrument panel and glare shield for condition. Copilot
Forward transmission main lube filter for extended warning
flight controls for condition.
Center instrument panel, compass and compass card, center
Forward transmission oil cooler (dr ip pan removed) for leaks and
console for condition.
security of components and hardware.
Mirror installed and secure.
Visible areas of forward transmission and cooling fan (bottom
Emergency power indicator flags for tripped position.
section of inlet duct removed) for cracks, nicks, and damage and
corrosion of impeller, diffuser, or housing. Impeller for evidence
Overhead panel for condition.
of tip rub.
Pilot instrument panel and glare shield for condition. Installation
Forward transmission synch shaft adapter (with bottom section
of topping stops. Pilot flight controls for condition.
of inlet duct removed) for cracks, evidence of foreign object
damage, and security of hardware. Plate assembly for cracks.
Number two PDP circuit breakers as required.
First aid kit for installation and serviceability.
Right jettisonable door latches for engagement (top and
bottom), for RELEASE handle in closed position. Sliding
Troop commanders seat and seat belt for installation and
window mechanism and latch for security, proper operation, and
Check wo rk area for tools and par ts after completion o f maintenance and insp ection.