Gearbox Assembly

TM 5-6675-250-34

b. Installation.

(2) Remove the gearbox assembly access cover

(1) Affix the tripod burnper to the outer shield

b y removing ten screws.

with RTV sealant, Military Specification MIL-A-

(3)

Remove

the

three

gearbox

assembly

46106RTV1O3BLA.

mounting screws.

(2) Place a new seal in the groove in the upper

( 4 ) Remove the gearbox assembly through the

assembly.

access.

(3) Mount the outer shield with the

( 5 ) Disconnect the gearbox assembly electrical

"DELICATE

I N S T R U M E N T " placard, below

c a b l e by rotating the connector mounting screws in

CAGE/UNCAGE knob and attach it to

the

upper

t h e counter clockwise direction. Alternate between

h o u s i n g assembly with eight screws.

the two screws every (2 to 3) turns. The connector

will be damaged if this technique is not followed.

4-5. Gearbox Assembly (fig. 4-3)

a. R e m o v a l .

( 1 ) Remove the main connector housing cover

b y removing ten screws.

Change 1, 4-5