Table 4-2. Ice Maker Troubleshooting - Continued
TEST OR INSPECTION
15. ICE MAKER IS HOOKED UP BUT NO WATER COMES IN.
Check if water has not been turned on at saddle valve clamp or at
the unit compartment.
Turn on valves.
Check if the two wires to the solenoid valve behind the grille have
become loose or disconnected.
Reconnect the wires.
Check if ice maker has not been activated.
Activate ice maker by reaching in with hands to pull the ejector
blades one turn around.
16. THE ICE MAKER IS REFRIGERATING BUT FAILS TO PRODUCE CUBES.
Water not turned on at saddle valve clamp.
Turn on saddle valve.
Check if solenoid valve has malfunctioned.
Check if the ejector blades are frozen into the ice maker mold.
Defrost and restart ice maker.
Check for a broken or worn coupling.
Check for defective door switch.
Adjust or replace door switch.