Display a Zone Summary

TM 5-6350-275-10

If you want to display only devices which are in a particular state, press one or more of the following keys and press

[NEXT]:

[FAILED] [DISABL] [ALMIN] [CNTIN] [ACNTIN] [ALARM] [AND] [NOT]

(4) Enter the following data:

[Group] - enter the specific group identifier or an [*], and press the [NEXT] key.

[Stn] - Enter the RADC identifier of an [*], and press the [NEXT] key.

[Prefix] - Enter the prefix or an [*], and press the [NEXT] key.

[Numeric] - Enter the numeric or an [*], and press the [NEXT] key.

[Suffix] - Enter the suffix or an [*], and press the [NEXT] key.

(5) Identify the zone whose devices are required by typing its identifier. Type an [*] to indicate all zones. Press the

[NEXT] key.

(6) Use the left and right arrow keys to select a device, then press [GO].

Display a Zone Summary.

(1) Select the F7 [SUMMRY] key from the main menu.

(2) Press the F2 [ZONE] key and confirm your selection by pressing [NEXT].

(3) If you want a list of zones regardless of condition press the [NEXT] and go to step (4). If you want to list zones

which are in a particular condition, select one or more of the following keys and press [NEXT]:

[ALM DI] and/or [ALM EN]

and/or

[ALL] [NORMAL] [NoENTR] [NoEXIT] [NoACCS] [UNLOCK]

(4) Either identify a single zone by typing its name or number or select all zones by entering the [*]. End the

command by pressing [GO].

Display a Card Holder Summary.

(1) Select the F7 [SUMMRY] key from the main menu.

(2) Press the F8 [CARD] key and confirm your selection by pressing [NEXT].

(3) Enter the card holder's name or enter only the * to indicate all names. Other methods for entering names are as

follows:

Smith* - All card holders with the same last name are listed.

Sm* - All card holders with the same prefix are listed.

(4) Press [NEXT] to go to the next prompt or [GO] to create the display.

E-23