RESTORING DATA FROM TAPE TO HARD DISK

TM 5-6350-275-10

b. Install a tape cartridge into the tape streamer module.

c. At the command form, type in "i q s", which stands for Install quicktape server. Press the [GO] key.

d. Next type in "Video" and press [RETURN]. Where "Suppress Pauses between Pages" is displayed, type in "Y"

and press the [GO] key.

e. After a short pause the command form reappears. Type in "t b v", which stands for tape backup volume. Press

the [NEXT] key.

Several prompts appear; two require answers. To go from prompt to prompt press the [NEXT] key.

Prompt

Answer

Volume or Device Name

d0 (dzero)

Password

############

Then press the [GO] key.

g. The message "Device is in use..." appears. Press the [GO] key.

h. On completion of the copying operation, the command form is displayed.

NOTE

If the tape cartridge has data recorded on it, you will be prompted to confirm overwriting

it. Press [GO] to confirm.

To return to normal polling type F E P and press [GO].

2-35.2. RESTORING DATA FROM TAPE TO HARD DISK

a. Obtain access to the ICIDS operating system by typing in user name and password. Press [GO]

b. At the command form, type in "t r", which stands for tape restore. Press the [NEXT] key.

c. Several prompts appear; two require answers. To go from prompt to prompt press the [NEXT] key.

Prompt

Answer

Overwrite?

: y

Confirm each?

: n

Press the [GO] key.

d. The system will prompt you to press [NEXT PAGE] or [SCROLL UP] to continue.

e. Restore data in one of the following ways:

(1) Press [CODE] and [NEXT PAGE] to continue restoring without stopping.

(2) Press [NEXT PAGE] and the system will restore data page by page, stopping between pages.

2-104