Removing a Zone Supervisor

TM 5-6350-275-10

(a) NAME. The name field cannot be modified.

(b) PASSWORD. Enter a password. The password can be up to 12 characters long. Press the [NEXT] key.

(c) ADDRESS. Enter up to 48 characters. Press the [NEXT] key.

(d) TELEPHONE. You can enter up to 12 digits. Press the [NEXTJ key.

(e) PRINTER. Do not change this field. Printer name was established during installation. Press the [NEXT]

key.

(f) ZONE. Enter the zone names authorized. Press the [NEXT] key to move to the next field. Up to 32

names can be entered.

(3) Press [GO] to save the record.

(4) Press [FINISH] to leave the program.

c. Removing a Zone Supervisor.

(1) Press the F3 Supervisor Records key from the Police Officer Menu Page. A list of current Zone Supervisor

Records, Figure 2-61, is displayed.

(2) Press the F3 [REMOVE] key and use the up and down arrow keys to select the record to delete. Press [GO]

and the record is removed.

(3) Press the [FINISH] key to exit the program.

Figure 2-63. Zone User Report

2-33.4. ZONE USER REPORTS (F4 KEY). The zone user report provides information of a restricted nature, on

individual zone users. An example of this report is provided in Figure 2-63. Generate this report as follows:

a. Press the F4 Zone User key from the Police Officer Menu Page.

b. Enter the zone user's name and press the [NEXT] key.

c. Enter the zone user's SSN and press [GO]. The report is then printed.

2-99