Recoverability Code cont'd - TM-5-6350-264-14-P-60033

TM5-6350-264-14&P-6

NAVELEX EE181-AA-OMI-07A/E121 DT-545

TO 31S9-2FSS9-1-6

-Reparable item. When beyond lower category repair capability,

return to depot. Condemnation and disposal of item not

authorized below depot category.

-Reparable item. Condemnation and disposal not authorized

below specialized repair activity.

-Item requires special handling or condemnation procedures

because of specific reasons (i.e., precious metal content, high

dollar value, critical material, or hazardous material.) Refer to

appropriate manuals/directives for specific instructions.

c. National Stock Number (Column (3)). Lists the National stock number (NSN) assigned to the item. Use the NSN for

requests/requisitions.

d. FSCM (Column (4)). The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code which is used to

identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

e. Part Number (Column (5)). Indicates the primary number used by the manufacturer (individual, company, firm,

corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering

drawings, specifications standards. and inspection requirements to identify an item or range of items.

NOTE: When you use an NSN to requisition an item, the item you receive may have a different part number from the

part ordered, but go ahead and use or furnish it as the replacement part.

f. Description (Column (6)). This column includes the following information:

(1) The Federal item name and, when required, a minimum description to identify the item.

(2) The physical security classification of the item is indicated by the parenthetical entry (insert applicable physical

security classification abbreviation, e.g., Phy Sec C1 (C) - Confidential, Phy Sec C1 (S) - Secret, Phy Sec C1 (T) - Top

Secret).

(3) Items that are included in kits and sets are listed below the name of the kit or set.

(4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry.

(5) NSN's for bulk materials are referenced in the description column in the line item entry for the item to be

manufactured/fabricated.

(6) When the part to be used differs between serial numbers of the same model, the effective serial numbers are

shown as the last line of the description.

(7) The USABLE ON CODE, when applicable (see paragraph 4, Special Information).

(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each special

tool, special TMDE, and other special support equipment. When density of equipments supported exceeds density spread

indicated in the basis of issue, the total authorization is increased proportionately.

Change 1 C-5