Quantcast Table 5-1. Troubleshooting Procedures - Continued - TM-5-6350-264-14-P-110037

 

Click here to make tpub.com your Home Page

Page Title: Table 5-1. Troubleshooting Procedures - Continued
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 5-1. Troubleshooting Procedures - Continued - TM-5-6350-264-14-P-110036
Up
TM-5-6350-264-14-P-11 Cabinet Monitor Type A CY 7359/FSS-9(V) NSN
Next
Table 5-1. Troubleshooting Procedures - Continued - TM-5-6350-264-14-P-110038
TM 5-6350-264-14&P-11
NAVELEX EE 181-AA-OMI-120/E121 C-7359-60-1
T.O. 31S9-2FSS9-1-11
Table 5-1. Troubleshooting Procedures - Continued
Trouble
Probable cause
Corrective Action
3.
Changing mode switch
Defective Status Monitor
a.
Remove Status Monitor Module
from SECURE to
Module
from one-zone Monitor Cabinet.
ACCESS does not
To remove Status Monitor Mod-
cause corresponding
ule, unlock and open Monitor
change at Status
Cabinet and turn off switch S1
Monitor Module in
on power supply. Release
Monitor Cabinet.
swingout rack. Remove screws
that secure status monitor
Module to rack and remove
module through front of rack.
b.
Connect jumper between terminal
2 and 4 of associated Monitor
Cabinet terminal board. Re-
place Status Monitor Module in
swingout rack and secure with
screws. Secure swingout rack.
Turn on switch S1 on power
supply.
c.
Actuate ACKNOWLEDGE switch
on Status Monitor Module.
d.
If access condition is not dis-
played, Status Monitor Module
is defective.
e.
To remove Status Monitor Module,
unlock and open Monitor Cabi-
net and turn off switch S1 on
power supply. Release swing-
out rack. Remove screws that
secure Status Monitor Module
through front of rack.
f.
Remove jumper from Monitor
Cabinet terminal board. Re-
place Status Monitor Module in
swingout rack and secure with
screws. Secure swingout rack.
Turn on switch S1 on power
supply. Actuate ACKNOW-
LEDGE switch on SMM.
g.
If secure condition is not di-
played, Status Monitor Module
is defective.
5-6

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.