TO 31S9-4-31-1 Chg 1
(4) Adjust biasing magnet in accordance with
In step 3, care must be excerised
to properly orient the two halves of
the magnet when reassembling.
performance standards (para 5-12).
Index marks are provided on the.
exterior of these halves to assure
correct orientation at the time of
interconnecting conduit and wiring, inspect interior of
switch assembly for presence of foreign material. If only
one conduit hole is to be used apply epoxy glue to the
(3) Reinstall second half of magnet assembly
threads of the conduit hole plug and insert it in the
on half which has previously been installed.
unused conduit hole. Secure the plug with the locking