TM 5-6350-262-14/7/NAVELEX 0967-466-0970/TO 31S9-4-28-1
3-1. Operator Controls
Table 3-1 lists and describes the alarm switch
3-2. Operating Procedure.
controls and indicators illustrated in figure 3-1.
Operating instructions consists only of actuating the
alarm switch whenever the security of the area under
protection is threatened. After an alarm has been
responded to, notify the appropriate direct support
(intermediate) or general support maintenance personnel
to have the alarm switch reset to a no-alarm condition.
Table 3-1. Operator's Controls
This table covers only items used by the
operator; items used by higher level
maintenance personnel are covered in
Control or indicator
Provides an alarm signal output
Figure 3-1 Alarm switch controls and indicators
Illuminates when alarm switch is
actuated. (Remains illuminated
until circuits are reset by higher
level maintenance personnel.