 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Code
Application/Explanation
(2) Maintenance Code. Maintenance codes are
assigned to indicate the levels of maintenance
Z
Nonreparable item. When unserviceable, condemn and
authorized to USE and REPAIR support items. The
dispose at the level indicated in position
maintenance codes are entered in the third and fourth
O
Repairable item. When uneconomically reparable, con-
positions of the Uniform SMR Code format as follows:
demn and dispose at organizational level
F
Reparable item. When uneconomically reparable, con-
(a) The maintenance code entered in the third
demn and dispose at the direct support level
position will indicate the lowest maintenance level
H
Repairable item. When uneconomically reparable, con-
authorized to remove, replace, and use the support
demn and dispose at the general support level
item. The maintenance code entered in the third
D
Repairable item. When beyond lower level capability,
position will indicate one of the following levels of
return to depot. Condemnation and disposal not authorized
maintenance:
below depot level
L
Reparable item. Repair, condemnation and disposal not
Code
Application/Explanation
authorized bolder depot/Specialized Repair Activity level
C
Crew or operator maintenance performed within organizational
A
Item requires special handling or condemnation procedures
maintenance.
because of specific reasons (i.e., precious metal
O
Support item is removed, replaced at the organizational level
content, high dollar value, critical material or hazardous
I
Support item is removed, replaced used by the direct
material). Refer to appropriate manuals / directives for
support element of integrated direct support maintenance.
specific instructions
F
Support item is removed, replaced, used at the direct support
c. Federal Stock Number. Indicates the Federal
level
stock number assigned to the item and will be used for
H
Support item is removed, replaced, used at the general support
requisitioning purposes.
lever
D
Support items that are removed, replaced, used at Depot,
d. Part Number. Indicates the primary number used
Mobil Depot, Specialized Repair Activity only.
by the manufacturer Individual, company, firm,
corporation, or Government activity), which controls the
NOTE
design and characteristics of the item by means of it's
Codes "I" and "F" will be considered the
engineering drawings, specifications standards, and
same by direct support units.
inspection requirements, to identify an item or range of
(b) The maintenance code entered in the
items.
For BIIL and lTIAL, see explanation of
fourth position indicates whether the item is to be
description column, ink, below.
repaired and identifies the lowest maintenance level
NOTE
with the capability to perform complete repair (i.e., all
When
a
stock
numbered
item
is
authorized maintenance functions) This position will
requisitioned, the repair part received may
contain one of the following maintenance codes:
have a different part number than the part
being replaced.
Code
Application/Explanation
O
The lowest maintenance level capable of complete repair of
e. Federal Supply Code for Manufacturer (FSCM).
the support item is the organizational level.
The FSCM is a five-digit numeric code listed in SB
F
The lowed maintenance level capable of complete repair at
70842 which is used to identify the manufacturer,
the support item is the direct support level
distributor, or Government agency, etc. For BIIL and
H
The lowest maintenance level capable of complete repair of
ITIAL, see explanation of description column, in f,
the support item is the general support level.
below.
D
The lowest maintenance level capable of complete repair of
the support item is the depot level performed by depot,
mobile depot or specialized repair activity.
f. Description. Indicates the Federal item and, if
L
Repair restricted to designated Specialized Repair Activity.
required, a minimum description to identify the item. (In
Z
Non-reparable. No repair is authorized.
BIIL and ITIAL only, the following will be used: "The last
B
No repair is authorized. The item may be reconditioned by
line for each item in the BIIL and ITIAL indicates the part
adjusting, lubricating, etc., at the user level. No parts or
number with the FSCM in parentheses". Items that are
special tools are procured for the maintenance of this item.
included in kits and sets are listed below the name of
the kit or set with the quantity of each item in the kit or
(3) Recoverability Code. Recoverability codes
set indicated in the quantity incorporated in unit column.
are assigned to support items to indicate the disposition
When the part to be used differs between serial
action on unserviceable items. The recoverability code
numbers of the same model, the effective serial
is entered in the fifth position of the Uniform SMR Code
numbers are shown as the last line of the description. In
format as follows:
the Special Tools List, the initial basis of issue (BO1)
appears as the last line in the entry for each Special
Tool, TMDE, and support equipment. When density of
equipments supported exceeds density spread indicated
in
C-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals