BASIC ISSUE ITEMS LIST, ITEMS TROOP INSTALLED OR AUTHORIZED LIST. REPAIR
PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
b. Source, Maintenance and Recoverability Codes
(1) Source code. Source codes are assigned to
This appendix lists basic issue items; item stroop
installed or authorized; repair parts; special tools; test,
support items to indicate the manner of acquiring
measurement, and diagnostic equipment (TMDE); and
support items for maintenance, repair, or overhaul of
other support equip-ment required for operation and
end items. Source codes are entered in the first and
performance of organizational, direct support and
second positions of the Uniform SMR Code format as
general sup-port maintenance of the monitor cabinets.
Item procured and stocked for anticipated or known usage.
The Basic Issue Items List, Items Troop In- stalled or
Item procured and stocked for ilsurance purposes because
Authorized List and Repair Parts and Special Tools List
essentially dictates that a minimum quantity be available
in the supply systems.
are divided into the following sections:
Item procured and stocked and which otherwise would be
Basic Issue Items List.
coded PA except that it is deteriorate in nature.
Support item, excluding support equipment, procured for initial
b. Section III. Items Troop Installed or Authorized
issue or outfitting and stocked only for subsequent or
List. (Not Applicable).
additional initial issues or outfitting. Not subject to
automatic replenish ment.
c. Section IV. Repair Parts List. A list of repair parts
Support equipment procured and stocked for initial issue or
authorized for use in the performance of maintenance.
outfitting to specified maintenance repair activities.
The list also includes parts which must be removed for
Support equipment which will not be stocked but which will be
replacement of authorized parts.
Parts list are
centrally procured on demand.
Item procured and stocked to provide for sustained support for
composed of assembly groups in ascending numerical
the life of the equipment. It is applied to an item peculiar
sequence, with the parts in each group listed in figure
to the equipment which, because of probable
and item number sequence. Bulk materials are listed in
discontinuance or shutdown of production facilities,
would prove uneconomical to reproduce at a later time.
d. Section V. Special Tools Lists. (Not Applicable).
An item of a depot overhaul/repair kit and not purchased
separately. Depot kit defined as a kit that provides items
e. Section VI. Federal Stock Number and Part
required at the time of overhaul or repair.
Number Index. A list in ascending numerical sequence
An item of a maintenance kit and not purchased separately.
of all Federal stock numbers appearing in the listings
Maintenance kit defined as a kit that provides an item
that can be replaced at organizational or intermediate
followed by a list, in alphanumeric sequence, of all part
levels of maintenance.
numbers appearing in the listings.
Item included in both a depot overhaul/repair kit and a
numbers and part numbers are cross-referenced to each
illustration figure and item number appearance.
Item to be manufactured or fabricated at organizational level.
Item to be manufactured or fabricated at the direct support
Explanation of Columns
Item to be manufactured or fabricated at the general support
The following provides an explanation of columns
found in the tabular listings:
Item to be manufactured or fabricated at the depot maintenance
a. Illustration. This column is divided as follows:
Item to be assembled at organizational level.
(1) Figure number. Indicates the figure number
Item to be assembled at direct support maintenance level.
of the illustration in which the item is shown.
(2) Item number. The number used to identify
each item called out in the illustration.