BASIC ISSUE lTEMS LIST, lTEMS TROOP
INSTALLED OR AUTHORIZED LIST. REPAIR
PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
b. Source, Maintenance and Recoverability Codes
This appendix lists basic issue items; items troop
installed or authorized; repair parts; special tools;
(1) Source code. Source codes are assigned to
test, measurement, and diagnostic equipment
support items to indicate the manner of acquiring
(TMDE); and other support equipment required for
support items for maintenance, repair, or overhaul of
operation and performance of organizational, direct
end items. Source codes are entered in the first and
support and general support maintenance of the grid
second positions of the Uniform SMR Code format as
The Basic Issue Items List, Items Troop Installed or
Item pnxumd and stocked for anticipated or known
Authorized List and Repair Parts and Special Tools
List are divided into the following sections:
Item procured and stocked for insurance purposes
because essentiality dictates that a minimum quan-
a. Section II. Basic Issue Items List. (Not Applica-
tity be available in the supply systems.
Item procured and stocked and which otherwise would be
b. Section III. Items Troop Installed or Authorized
co&d PA except that it is deteriorative in nature.
List. (Not Applicable).
Support item, excluding support equipment, procured for
c. Section IV. Repair Parts List. A list of repair
initial issue or outfitting and stocked only for
parts authorized for use in the performance of
subsequent or additional initial issues or outfittings.
Not subject to automatic replenishment
maintenance. The list also includes parts which must
Support equipment procured and stocked for initial issue
be removed for replacement of the authorized parts.
or outfitting to specified maintenance repair activities.
Parts list are composed of assembly groups in
Support equipment which will not be stocked but which
ascending numerical sequence, with the parts in
will be centrally procured on demand.
each group listed in figure and item number
Item procured and stocked to provide for sustained
sequence. Bulk materials are listed in FSN sequence.
support for the life of the equipment. It is applied to an
item peculiar to the equipment which, because of
d. Section V. Special Tools List. (Not Applicable)
probable discontinuance or shutdown of production
e. Section VI. Federal Stock Number and Part
facilities, would prove uneconomical to reproduce at a
Number Index. A list in ascending numerical
sequence of all Federal stock numbers appearing in
An item of a depot overhaul/repair kit and not purchased
the listings followed by a list, in alpha-numeric
separately. Depot kit defined as a kit that provides
items required at the time of overhaul or repair.
sequence, of all part numbers appearing in the
An item of a maintenance kit and, not purchased
listings. Federal stock numbers and part numbers
separately. Maintenance kit defined as a kit that
are cross-referenced to each illustration figure and
provides an item that can be replaced at organiza-
item number appearance.
tional or intermediate levels of maintenance.
Item included in both a depot overhaul/repair kit and a
C-3. Explanation of Columns
Item to be manufactured fabricated organization
The following provides an explanation of columns
found in the tabular listings:
Item to be manufactured fabricated at the direct
a. Illustration. This column is divided as follows:
support maintenance level
(1) Figure number. Indicates the figure number
Item to be manufactured or fabricated at the general
of the illustration in which the item is shown.
support maintenance level.
(2) Item number. The number used to identify
Item to be manufactured or fabricated at the depot
each item called out in the illustration.