Table 3-1.. Organizational Preventive Maintenance Checks and Services

Table 3-1.. Organizational Preventive Maintenance Checks and Services - continued

Q-Quarterly

Work

Items to be Inspected

Sequence

Time

Procedure

Number

(M H)

INTERCONNECTING WIRING HARNESS/CONDUIT

Inspect (at point of entry) wiring for frayed and deteriorated condition. Verify conduit is

securely attached to the housing.*

EXTERIOR SURFACES

Inspect exterior surfaces for rust, corrosion, dents. cracks. nicks. burrs. scratches or chipped

paint. Repair as necessary visibly damaged surfaces. Refer to paragraph 3-2 for painting

instructions.

* Repair not authorized at organizational level. Notify direct support and general support maintenance personnel of any defects.

3-7. Cleaning

mild solution of warm water and liquid soap to clean

housing and cover parts. After cleaning, rinse parts

Cleaning of the grid wire sensor by organizational

with cold water to remove any soap solution and dry

level personnel is limited to the exterior surfaces.

thoroughly.

Contaminants should be removed by washing with a

3-2