Items to be inspected
Inspect transceiver for clear line
of sight for surveillance area. No
obstructions, stacked or hung in
front of the transceiver.
Perform a walk test of the area
surveyed by each transceiver
Inspect exposed metal surfaces
for rust and corrosion. Clean
and touchup paint as required.
Inspect the exterior of the equipment. The exterior
Do not use Trichloroethane or any other
surfaces should be free of dust, dirt, grease, and fungus.
hydro carbon cleaning agent. Use only
soap and water for cleaning purpose.
a. Remove dust and loose dirt with a clean, soft
b. Remove grease, fungus and ground-in-dirt
from the case using a cloth dampened (not wet) with
soap and water.
Section V. TROUBLESHOOTING
No troubleshooting is performed at organizational maintenance.
Section VI. MAINTENANCE OF PROCESSOR
No maintenance is performed on the processor at organizational maintenance.
Section VII. MAINTENANCE OF TRANSCEIVER
No maintenance is performed on the transceiver at organizational maintenance.