Installation of new wiper

(4) Force the wiper onto the journal by

e. Installation of new wiper.

tightening the wheel bearing adjustment nut. The wiper

must be installed squarely to allow proper installation of

(1) Clean entire axle spindle, removing all

inner wheel bearing. the end of the wiper must be flush

nicks and burrs.

with the bearing shoulder.(fig. 4-7).

(2) Apply a thin coat of non-hardening gasket

sealer around the journal of the spindle.

(3) Position new wiper and driver as shown in

figure 4-7. See figure 4-5 for typical driver dimensions.

4-18