Control transformer, Classification and Rating

TM 5-6115-423-15

Mounting dimensions ______ width: 4 inches

single phase, full wave

height: 4 5/8 inches plus

bridge

1 1/8 inches (terminal)

Contactor, Classification and Rating.

length: 5 1/4 inches

Rating ------------------- 3 PST 200 amperes, 200

5/6 x 9/16 inches

volts 400 cycle 28 volt

elongated mounting

holes in base

Controls 40 kw 3-phaae

Control transformer, Classification and

wye connected bal.

Rating.

resistive load

Rating_.. ---------------- 120/240 volt, 50-1000 cps

120/208 v. 3-phase,

single phase dual voltage

4-wire 240 v. 3 phase,

input, output:

3 wire 240/416 v. 3-

Rating ______ ____________ 34.5 0.4 at open circuit

phase 4-wire input at

31.5 0.4 volts at 2.0

50-1000 cycles/see.

amperes

h. Relay, Classification and Rating.

26.0 * 0.4 volts at 6.0

Type rating

150 volts

minimum

amperes

--------------

Capacity _________________ 115 VA, forced air cooled

200 volts maximum

50-1000 cps

at 500 lineal feet per

minute. At 125" F.

Variable Transformer, Classification and

ambient must be capable

Rating.

of operating at 138/276

Rating -------------------- 0-3 KW 3-gang 3-phase

volts input

10 amperes maximum

Mounting dimensions ------ Width: 3 5/8 inches

output

height: 4 3/16 inches

Rating _________________Stepless, manually adjusted,

plus 5/8 inches (ter-

output 0-240 volts

minals)

240 volt input constant

Length: 4 1/2 inches.

impedance load, 319

f. Selenium Rectifier, Classification and

rotation

Rating.

Dimensions --------------- Length: 16 7/8 inches

Rating-_________________ 2.5 amperes, 30 VOltS DC

Height: 5 5/8 inches

at 122" F ambient con-

Width: 6 inches

vection cooled composed

j. Practical Wiring Diagrarn. Figure 5 shows

of four 3.3 inch, 40 volt

the practical wiring diagram for this load bank.

RMS cells connected in