Quantcast Section II. GENERATOR SET EVALUATION PROCEDURE - TM-5-6100-223-ESC0005

 

Click here to make tpub.com your Home Page

Page Title: Section II. GENERATOR SET EVALUATION PROCEDURE
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Reporting of Equipment Publication Improvements
Up
TM-5-6100-223-ESC Generator Set Gas Turbine Engine 30-KW AC 120/208 V 3 Phase 400-Hz Skid-Mtd Winterized Manual
Next
MODIFICATION WORK ORDERS (MWOs) - TM-5-6100-223-ESC0006
TM 5-6100-223-ESC
Section II. GENERATOR SET EVALUATION PROCEDURE
5.
Evaluation Requirements. Before inspecting the generator sets, insure that fuel, lubricating oils and battery levels are adequate and that the generator
set will, without damage, operate satisfactorily to perform the requirements of this evaluation.
Procedures. a. Evaluation. All information will be determined by actual inspection and operation of the equipment. Evaluate each item listed and record
6.
the proper rating on DA Form 2404 as described in section I. All operator/crew preventive maintenance checks and services will be performed prior to evaluation.
Item 1. MODIFICATION WORK ORDERS (MWOs)
RATINGS
PROCEDURE
GREEN
AMBER
RED
Determine if all urgent MWOs have been
All urgent MWOs
One or more urgent
applied. Refer to DA Form 2408-5 in
have been applied.
MWOs have not been
the log book.
applied.
Item 2. BATTERIES -. INSPECTION
Inspect for obvious defects which make
All batteries are
One or more batteries
the batteries unserviceable, such as
present. The batteries
missing or will not
cracked or broken cases or burned
rotate the turbine
rotate the turbine to the
posts.
to the required
required starting RPM.
starting RPM.
Item 3. ENGINE OPERATION - INSPECTION AND OPERATION
Start the engine. After ignition, check the
Operates properly.
Detectable noise, no
Excessive noise or
acceleration speed to the maximum governed
vibration. Operates
vibration. Not operating
RPM, 60 seconds maximum. At the maximum
properly.
properly or inoperative.
governed RPM, with no load, check for
any erratic operation, unusual noise
or vibration.
5

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business