Tape, Measuring General Purpose Distance Measuring type, 100 feet long, Graduated in
Standard Units of 1/100, 1/10 and 1 foot increments, left hand to right hand reading, 2.8
inch wide steel paint finish, with case, nonbutt ent type, hand crank rewind
(Used for circumferential measurement)
rape, Measuring, General Purpose Distance Measuring Type, 300 foot long, Graduated in
Standard Units of Feet, 1/10 ft Increments, Left hand to right hand reading, 5/16 inch
wide, steel, with reel, hand crank rewind, with blank space on each end and 1 hardwood "D"
Used for circumferential measurement}
Knife, scraping, 41/2 inch blade
(Used to clean tank shell to secure a more accurate measurement).
Caliper, Spring, Rectangular Leg, Adjusting Screw, 8 inch
(Used to measure openings, "deadwood" or places that are difficult to measure with a tape)
Divider, Drafing, Longitudinal Corrugated Handle with Split Leg Joint, 6 inch
(Used for spanning flanges)
Stencil Set, Marking, Brass, Interlocking, 4 inch letters
(Used to mark tank heights, fluid heights and/or tank numbers).
Brush, stencil, 1 inch X 1 inch X 9 inches long
(USED with stencil set, FSN 7520-269-9012, above).
Ladder, Extension, 32 feet
(Used in measuring tank and fluid heights).
Box, Tool, Steel
(Used to carry and safeguard "strapping" tools).