Add LNCG posts, LNCG and nose roller.
Check that LR is under LZ given or higher Remove nose sections
as they pass LRP, observing minimum 5 ft (1.5 m) overhang.
Leave last three nose sections in place until far bank end of bridge
has been lowered to ground.
Launch until far bank end of bridge is 9 in (23 cm) from LRP, or
end of ETP overhangs CRB by 1.5 ft (0.5 m).
Put bridge on ground
Add given length launching nose with LRP secured with tie down
Nose completed by adding 8th LNH or 6 LNH required for 3N2
Center of gravity