Air Intake.

TM 43-0156

Step

Function

Mech

Insp

cont

MIL-T-22085 tape. PPP-T-60, type 4, 4-inch wide

tape may be used as a substitute.

(d) Cover louvers with MIL-B-131 barrier and NN-P-530

5/16-inch plywood (20 x 20) and secure with FF-B-

584 machine bolts (1/4 x 3 NC). NN-P-530, 3/8-

inch plywood may be used as a substitute.

(e) Seal edges with MIL-T-22085 tape. PPP-T-60 tape

may be used as a substitute.

(5)

Air Intake.

(a) Wrap filter with MIL-B-131 barrier, install and

lock metal door.

(b) Seal edges with MIL-T-22085 tape. PPP-T-60 tape

may be used as a substitute.

(6)

Batteries and Cables.

(a) Coat the battery cable connectors with MIL-S-8660

silicone. Wrap with MIL-B-121 barrier and secure

with PPP-T-60 tape.

(b) Secure cables to frame.

Place NN-P-530 plywood shims (10-1/2 x 8-1/2)

between batteries to prevent movement.

(d) Install Jumper cables and coat battery posts with

MIL-S-8660 silicone.

(7)

Relay Room and Fuse Panel.

(a) Fuses.

1 Remove fuses from fuse panel and battery charger.

2 Wrap fuses with MIL-B-121 barrier and place in

MIL-B-117 plastic bags according to rating. Heat

seal bag. Mark bag to indicate contents.

3 Place bagged fuses in a PPP-B-636 fiberboard box

(12 x 12 x 12) and seal with PPP-T-76 tape. Mark

box to indicate contents.

4 Place box in the relay room and secure with MIL-T-

22085 tape. PPP-T-60 tape may be used as a substitute.

(b) Electrical Contacts. Coat electrical contacts and

terminals with MiL-C-83360 coating compound.

Change 1

B-3-12