Preparation of survey to determine cubic occupancy

TM 38-400/NAVSUP PUB 572/AFMAN 23-210 MCO 4450.14/DLAM 4145.12

1 Bin and rack cubic capacity will

(a) Planograph worksheets will be

be determined as per paragraph e(2)(a) above.

designed for each warehouse section. The worksheets

will depict the storage pattern including structural loss

2 Bulk cubic capacity will be the

and assigned support space as well as the location of

product of the net square feet used for bulk storage

rack, bin, and bulk storage areas. Bulk storage grids will

multiplied by the stacking height permitted by safety

be numbered sequentially by section (see fig 2-60).

restrictions and floor load limitations attainable with

Partially obstructed grids or grids on which pallet rack

available MHE and storage aids, as appropriate. Cubic

storage aids, etc., are positioned will not be numerically

space beyond the reach of available MHE lift height and

designated.

Planograph worksheets for warehouse

floor load limitations will not be reported even though

sections having the same dimensions, clear stacking

safety limitations or permissible stacking heights have

heights, and containing the same items, may be

not been attained.

numbered (individual storage grids) continuously from

(b) The

attainable

cubic

space

section to section or warehouse to warehouse. This will

available for storage of material in open storage areas

reduce the efforts involved in accomplishing the

will be determined as per paragraph e(2)(b) above.

statistical survey discussed in paragraph (4) below.

(3) Preparation of survey to determine cubic

occupancy.

2-62