Appendix E: REPAIR PARTS AND SPECIAL TOOLS LIST

TM 32-5895-227-14&P

APPENDIX E

REPAIR PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

Code

Definition

E-1 SCOPE. This appendix lists spares and repair

parts; special tools; special Test, Measurement, and

Item procured and stocked for anticipated or

Diagnostic Equipment (TMDE), and other special support

known usage.

equipment required for performance of organizational,

Item is not procured or stocked. If not

direct support, and general support maintenance of

available through salvage, requisition.

Communications Central AN/MSQ-71. It authorizes the

A support item that is not stocked. When

requisitioning and issue of spare and repair parts as

required, item will be procured through

indicated by the source and maintenance codes.

normal support channels.

E-2 GENERAL. This Repair Parts and Special Tools

NOTE: Cannibalization or salvage may be used as a

List is divided into the following sections:

source of supply for any items coded above except those

a. Section II. Repair Parts List. A list of spares

coded XA and aircraft support items as restricted by AR

and repair parts authorized for use in the performance of

700-42.

maintenance. The list also includes parts which must be

removed for replacement of the authorized parts. Parts

(2) Maintenance Code. Maintenance codes are

lists are composed of functional groups in numeric

assigned to indicate the levels of maintenance authorized

sequence, with the parts in each group listed in figure and

to USE and REPAIR support items. The maintenance

item number sequence. Bulk materials are listed in

codes are entered in the third and fourth positions of the

National Stock Number (NSN) sequence.

uniform SMR code format as follows:

b. Section III. Special Tools List. A list of special

tools, special TMDE, and other special support equipment

(a) The maintenance code entered in the third

authorized for the performance of maintenance.

position will indicate the lowest maintenance level

c. Section IV. National Stock Number and Part

authorized to remove, replace, and use the support item.

Number Index. A list, in National Item Identification

The maintenance code entered in the third position will

Number (NIIN) sequence, of all National Stock Numbers

indicate one of the following levels of maintenance:

(NSN) appearing in the listings, followed by a list in

alphanumeric sequence of all part numbers appearing in

Code

Application/Explanation

the listings. National stock numbers and part numbers are

cross referenced to each illustration figure and item

Support item is removed, replaced, used at

number appearance. This index is followed by a cross-

the direct support level.

reference list of reference designators to figure and item

Support items that are removed, replaced,

numbers.

used at depot, mobile depot, or specialized

repair activity only.

E-3

EXPLANATION OF COLUMNS.

a. Illustration. This column is divided as follows:

(b) The maintenance code entered in the

(1) Figure Number.

Indicates the figure

fourth position indicates whether the item is to be repaired

number of the illustration on which the item is shown.

and identifies the lowest maintenance level with the

(2) Item Number.

The number used to

capability to perform complete repair; i.e., all authorized

identify item called out in the illustration.

maintenance functions. This position will contain one of

b. Source, Maintenance, and Recoverability (SMR)

the following maintenance codes:

Codes.

(1) Source Code. Source codes indicate the

Code

Application/Explanation

manner of acquiring support items for maintenance repair,

or overhaul of end items. Source codes are entered in

The lowest maintenance level capable of

the first and second positions of the uniform SMR code

complete repair of the support item is the

format as follows:

direct support level.

E-1