Front Panel Plate Removal and Replacement.

TM 32-5865-218-24&P

Install the two screws (8) that secure the bottom cover

(7)

(9) to the front panel (3).

Install the top cover in accordance with paragraph 5-12b.

(8)

Refer to figure 5-13

c. Bottom Cover Removal and Replacement.

and proceed as follows:

(1)

Place unit bottom-side up and remove 10 screws (8) that

secure cover (9) to ECM bracket (36), chassis (52), and

front panel (3).

Remove four screws (20) that secure FL1 (19) to bottom

(2)

cover (9), then remove cover.

To replace the bottom cover (9), secure FL1 (19) to the

(3)

bottom cover (9) with four screws (20).

(4)

Place the unit bottom-side up and aline the bottom cover

(9) with the mounting holes on the chassis (52) and

install the 10 screws (8).

Refer to figure

Front Panel Plate Removal and Replacement.

5-13 and proceed as follows:

Release two turnlock studs (10) that secure front panel

(1)

plate (11) to front panel (3).

Remove screw (60), washer (62), washer (70), lock washer

(2)

(71), and nut (72) that secure chain (45) to plate (11).

To replace front cover plate (11), secure chain (45) to

(3)

plate (11) with screw (60), washer (62), washer (70),

lock washer (71), and nut (72), then secure plate (11) to

front panel (3) with two turnlock studs (10).

(4)

Refer to section V of this chapter.

Refer to figure 5-13

PCB Retainer Removal and Replacement.

and proceed as follows:

Remove front panel plate (11) in accordance with

(1)

paragraph 5-12d.

(2)

Remove two screws (63) that secure PCB retainer (61) to

front panel plate (11).

Replace PCB retainer (61) to front panel plate (11),

(3)

using two screws (63).

Replace front panel plate (11) in accordance with

(4)

paragraph 5-12d.

Refer to section V of this chapter.

(5)

5-39