Maintenance Code - TM-32-5865-216-24-P0089

TM 32-5865-216-24&P

Definition

Code

Item to be manufactured or fabricated at the general

support maintenance level.

Item to be manufactured or fabricated at the depot

maintenance level.

Item to be assembled at the organizational level.

Item to be assembled at the direct support main-

tenance level.

Item to be assembled at the general support main-

tenance level.

Item to be assembled at the depot maintenance level.

Item is not procured or stocked because the

requirements for the item will result in the

replacement of the next higher assembly.

Item is not procured or stocked.

If not available

throuqh salvage, requisition.

Installation drawing, diagram, instruction sheet, or

field service drawing that is identified by

manufacturer's part number.

A support item that is not stocked. When required,

item will be procured through normal supply

channels.

NOTE

Cannibalization or salvage may be used as a source of

supply for any items source coded above except those

coded XA, and aircraft support items as restricted

by AR 700-42.

(2) Maintenance Code. Maintenance codes are assigned to

indicate the levels of maintenance authorized to USE and REPAIR

support items. The maintenance codes are entered in the third and

fourth positions of the Uniform SMR Code format as follows:

(a) The maintenance code entered in the third position will

indicate the lowest maintenance level authorized to remove, replace,

and use the support item. The maintenance code entered in the third

position will indicate one of the following levels of maintenance: