Fitting the EMI/RFI gasket is critical to ensure an
air-tight closure that meets the anti-sparking
requirements of Tunable Coupler CU-2293/ALQ-151(V).
To replace the bottom cover or chassis gasket, refer to
Section V. GENERAL SUPPORT TEST PROCEDURES
This section provides the test procedure that should be
performed after any repair and alignment is completed to determine
whether the performance of the repaired tunable coupler is
satisfactory for return to the user.
Perform all the steps in tables 5-1 and 5-2 to verify operation
of power supply CCA Al and motor control CCA A2. Perform each step in
the sequence listed. Then, ensure that the ATE tests in TM
32-5865-216-40&P are performed to verify satisfactory performance of
the tunable coupler.