Quantcast Top Cover Removal

 

Click here to make tpub.com your Home Page

Page Title: Top Cover Removal
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Cleaning. - TM-32-5865-216-24-P0061
Up
TM-32-5865-216-24-P Tunable Coupler CU-2293/ALQ-151(V) Manual
Next
Front  Hook  Removal
TM 32-5865-216-24&P
Before performing any removal procedure, ensure that
power is disconnected from the tunable coupler.
5-10.1.  Top Cover Removal.  Remove 68 screws (1) and flat washers (2)
Lift cover straight up and off
that secure top cover (3) to chassis.
chassis.
Bottom Panel Removal.
Place chassis in upside-down position.
a.
b.
Remove 28 screws (4) that secure the bottom panel (5) to
chassis.
c.
Remove panel from chassis.
Assembly A1 and A2 Removal.
5-10.3. Circuit
Card
Remove top cover (3) in accordance with paragraph 5-10.1.
a.
Remove four screws (two on each side) (6) that secure CCA A1(7)
b.
or A2 (8) in chassis.
c.
Grasp CCA by top edge and pull out of chassis.
Circuit Card Assembly A3, A4, and A5 Removal.
Remove top cover (3) in accordance with paragraph 5-10.1.
a.
Grasp the CCA A3 (9), A4 (10), or A5 (11) by top edge and pull
b.
out of chassis.
Vent Cover and Screen Assembly Removal.
Remove the top cover (3) or bottom panel (5) in accordance with
a.
paragraph 5-10.1 or 5-10.2 as required to have access to the
vent cover.
Remove the eight rivets (12) securing vent cover (13) and
b.
screen assembly (14) in accordance with paragraph 5-10.19 and
remove the vent cover and the screen assembly.
Resistor R1, R2 and R3 Removal.
Remove top cover (3) in accordance with paragraph 5-10.1.
a.
Remove bottom panel (5) in accordance with paragraph 5-10.2.
b.
Tag and unsolder the two wires from resistor to be removed
c.
(15).

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.